The Application of Trackless Equipment and Conveyor Hoisting at Dumbarton Mines Limited

CIM Bulletin, 1973

C. P. MOORE, Manager, Consolidated Canadian Faraday Ltd. G. W. TAYLOR, Planning Engineer, Dumbarton Mines Limited, Werner Lake, Ontario

Vertically dipping lenses of nickel-copper ore at Dumbarton Mines Limited are being mined by a modified blasthole stoping method. The principal access to the mine is provided by a 15-degree decline, which, in conjunction with the use of ramps and declines for secondary access, maximizes the accessibility and mobility of trackless mining equipment. Sublevels are driven in ore on 80-foot vertical intervals and subsequently the ore, ranging in thickness from 15 to 30 feet, is slashed to its limits by a procedure of face sampling and test holing. Two longhole drill jumbos are used to drill off 40-foot vertical slices above and below these levels. Following blasting, the ore falls by gravity to the 500-foot horizon, where it is removed from drawpoints by load-haul-dump units and transported by truck to the main orepass. The rock is crushed to minus 3-4 inches and conveyed to surface by a 30-inch-wide wire rope suspended conveyor. This is achieved in two flights, a lower one of 290 feet and a main flight of 2260 feet. All aspects of the mining operation are discussed in the paper, including ventilation, services and safety.
Keywords: andesite, Dumbarton Mines, Lac du Bonnet, nickel, ore, conveyors, Cost, Costs, Mine, Mines, Ore, Ores